Basic Info.
Internal Elimination Code
C0, C1, C2, C3, C4
Vibration
Z1V1, Z2V2, Z3V3
Quality
Abec1 Abec2 Abec3 Abec5
Place of Origin
Shandong China (Mainland)
Trademark
LCSL or as your request
Product Description
China Bearing Factory Manufacturer needle roller bearing NA6906 needle roller bearing
Shandong bearing
Needle bearing
Characteristics of the use
Needle bearing with fine and long roller for the roller length, so the radial structure is compact, its inner
Diameter size and load capacity and other types of bearings at the same time, the minimum outside diameter,
Particularly applicable to the limited size of radial installation supporting results.
According to different using occasions, can be used without the inner ring of the bearing or needle roller and
Cage components, at this time to suit the bearing surface of the shaft neck and the shell hole surface directly as
A bearing surface of the inner and outer rolling, in order to ensure the loading ability and work performance and
You have the same ring bearing, shaft or shell hole hardness on the surface of the raceway, the machining
Accuracy and surface quality should be as a bearing ring raceway. NEEDLE ROLLER BEARING
Description
Needle roller bearings are roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings
Have a high load carrying capacity and are therefore extremely suitable for bearing arrangements where radial space is limited. The outer rings of this
Needle bearings and bearings case are interference fitted without axial fixed settings. The effcient capacity can be maintained even if in the condition
Of high speed and huge loading capacity.
Needle roller bearing used for general engineer
1. Open type drawn cup needle roller bearing(1)
2. Closed type drawn cup needle roller bearing(2)
3. Needle roller bearing with inner ring(3)
4. Needle roller bearing without inner ring/ needle roller bearing without inner ring and cage(4)
5. Full needle roller bearing with cage or without cage(5)
Type of needle roller bearing
1. Radial needle and cage component
2. NA, NKI needle roller bearing
3. RNA, NK needle roller bearing without inner ring
4. HK type drawn cup caged needle roller bearing
5. BK type drawn cup caged needle roller bearing
Metric needle roller bearing
HK, BK, F, FH, FY, MF, MFH, MFY; TA...Z, TLA...Z, TAM, TLAM, YT, YTL
Inch needle roller bearing
SCE, BCE, SCH, BCH, SN, B, BH, M, MH,; BA...Z, BHA...Z, BAM, BHAM, YB, YBH
1. RS--- single side sealed with metric system
2.2RS--- double sealed with metric system
3. P--- single side sealed with inch system
4. PP--- double sealed with inch system
5. STO--no outer wall, an inner ring roller bearing
More introduction on the needle roller bearing
RNA22...2RS double sealed, no inner ring roller bearing
NA22...2RS double sealed, an inner ring roller bearing
NATR...PP flat ring axial guide roller bearing
NATV...PP flat ring axial guide roller bearing, full needle
NUTR rolling body guide roller bearing, full roller
CRY inch flat ring guide roller bearing
bearing code | d | D | B | C | C0 | PU | reference speed | limiting speed | mass |
K 32X37X13 | 32 | 37 | 13 | 14,7 | 25,5 | 3 | 13000 | 14000 | 0,018 |
K 32X37X17 | 32 | 37 | 17 | 19 | 35,5 | 4,25 | 13000 | 14000 | 0,019 |
K 32X37X27 | 32 | 37 | 27 | 28,6 | 60 | 7,35 | 13000 | 14000 | 0,030 |
K 32X38X20 | 32 | 38 | 20 | 25,1 | 45 | 5,6 | 12000 | 14000 | 0,030 |
K 32X39X16 | 32 | 39 | 16 | 22,9 | 35,5 | 4,25 | 12000 | 14000 | 0,037 |
K 32X39X18 | 32 | 39 | 18 | 25,5 | 41,5 | 5 | 12000 | 14000 | 0,031 |
K 32X40X25 | 32 | 40 | 25 | 35,8 | 58,5 | 7,2 | 12000 | 14000 | 0,049 |
K 32X40X42 ZWTN | 32 | 40 | 42 | 48,4 | 83 | 10,2 | 14000 | 12000 | 0,077 |
K 32X46X32 | 32 | 46 | 32 | 62,7 | 83 | 10,4 | 11000 | 13000 | 0,119 |
K 35X40X13 | 35 | 40 | 13 | 15,4 | 28 | 3,25 | 12000 | 13000 | 0,019 |
K 35X40X17 | 35 | 40 | 17 | 19,8 | 39 | 4,65 | 12000 | 13000 | 0,021 |
K 35X40X25 | 35 | 40 | 25 | 28,1 | 60 | 7,35 | 12000 | 13000 | 0,031 |
Address:
Yandian North Ring Industry Zone, Liaocheng, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 14001, IATF16949
Company Introduction:
The company is located in liaocheng shandong province, the geographical position is superior, the company is located in hebei shandong provinces at the junction of the shandong linqing city shop in town, 25 kilometers from the Beijing-kowloon railway, the east chat highway, 308 national highway running through, the traffic is very convenient.
The company built in 2004, is engaged in the production of trade-based private enterprises. The company covers an area of 6000 square meters, factory building area of 3000 square meters. The company introduced the latest fully automatic equipment more than 20 units, more than 50 employees.
Our company supplys different kinds of products. High quality and favaroble price. We′ Re pleased to
Get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first,
Service first, continuous improvement and innovation to meet the customers" for the management and
"zero defect, zero complaints" as the quality objective.